scaffolding couplers, including connecting steel pipes, flat steels, hardwood wedges and cross buckles, etc. This article will introduce the relevant knowledge of the scaffolding coupler, I hope it will be helpful to everyone.
The installation process of the scaffolding coupler.
The scaffolding coupler products owned by the company.
When setting up an external scaffold, the installation process of this scaffolding coupler is as follows:
When there is no post-pouring concrete at the reinforced column head, the first bolt hole on the flat steel is used to tie the pre-embedded reinforced column head in the reinforced concrete structure of the building floor to play the role of tie, and then the two-way connection at the front end of the steel pipe A hardwood wedge is driven into the slope C, and the hardwood wedge of the scaffolding coupler is pressed against the reinforced concrete structure of the building floor. After pulling and topping, a force couple is formed, making the connecting steel pipes unable to rotate in the left and right directions, and then the cross buckle is used to connect The rear end of the steel pipe is connected with the riser of the outer scaffold, so that while ensuring the lateral stability of the outer scaffold, it also achieves the effect of promoting longitudinal stability. Because the cross buckle of the scaffolding coupler is used to connect the connecting steel pipe with the outer scaffolding riser, the connection at the rear end of the connecting steel pipe can be adjusted. The distance between the outer scaffold and the reinforced concrete structure of the building floor can be different, and the rear end of the connecting steel pipe can be selected differently. Cross buckles are used to connect the outer scaffold standpipe at the connection point, so that the scaffolding coupler has freedom and flexibility in the installation distance. A hardwood wedge is driven into the two-way slope at the front end of the connecting steel pipe. The hardwood wedge of the scaffolding coupler presses against the reinforced concrete structure facade of the building floor. The risers of the scaffolding are connected.
The products provided by Nanjing Tuopeng are high-quality and affordable scaffolding materials. Customization requirements can be met here. Our products are exported to Canada, the United States, Trinidad and Tobago, New Zealand, Thailand, Malaysia, Colombia, the Middle East, Poland and other European countries. We can provide frame scaffolds, scaffolding couplers, ring lock scaffolds, scaffold tubes, cup lock scaffolds and other products. Among them, the scaffolding coupler includes: scaffold drop forged joints and scaffold press joints.
If you are satisfied with our company's scaffolding coupler, you can directly order or consult the scaffolding coupler related issues. We will provide you with the best scaffolding coupler products and services. Looking forward to your visit, I wish you success in your work.
Frame scaffolding is a necessary part of building and house maintenance, so how do we set up the frame scaffold correctly to ensure the safety of the people using the equipment? How to maintain the frame scaffold can make it last longer?
How to erect frame scaffolding?
Frame scaffolding repair checklist
How to properly maintain frame scaffolding?
1.Choose a safe foundation to build and set up your frame scaffolding. Obtain mudstone or floor to fix the scaffolding ladder frame to make the foundation more stable. One of the main concerns here is to make the scaffolding level and on a firm ground. If you are on uneven ground, you need to dig to make the dirt level in any high corners. In addition, use the adjustment screws on the scaffold to level the structure. If the surface is on a steep slope, get a leg stretch.
2. Choose casters. If you plan to move the scaffold to work in various positions, include casters in the scaffold setup. Remember to lock the casters when they are fixed in place.
3. Lay out the ends of the frame scaffolding. Lift one end and attach the cross bracket. When you lift the second end piece and connect its upper cross brace, the far end of the brace should support the end part. Fix the end of the cross brace to the bottom of the opposite end frame.
4. Ensure that the scaffold is stable. Move the scaffolding ladder frame to the desired position and make sure it is level and firm.
5. Lift the plank through the scaffold and put it in place. Hardware should be included to hold the board in place.
6. If using a ladder to access the stand, use a ladder designed for that particular stand. A stair-like ladder can be used to access the scaffold, but it must have handrails and treads. One problem with access points is to ensure safe operation and prevent the scaffold from tipping over.
7. Due to the height of the equipment and the risk of falling, it is strongly recommended to use guardrails on all scaffolding. You can also consider the use of plugs and other fall protection devices.
8. Thoroughly check the frame scaffolding settings to ensure that all parts are secure. Every time you leave the site and return to the site, recheck the scaffolding system to make sure it is still safe.
1.After purchase, the customer (the builder or contractor) should install the scaffolding in accordance with the manufacturer's guidelines.
2. When moving and transporting scaffolding ladder equipment, customers should take extra care and ensure that they are properly stored using the correct storage system. Develop a proper scaffold maintenance checklist and follow the checklist.
3. Frame scaffolding should ideally be stored in a suitable moisture-free and frost-free environment.
4. Check the scaffolding regularly, and if you find any general damage or damage, please provide necessary repairs and/or refurbishment.
1.The handling, transportation and storage of the scaffolding ladder frame will greatly affect the service life of any scaffolding type. If the correct scaffolding wine rack is not used to store the scaffolding equipment, will the scaffolding tube bend, warp, beat and dent? This will reduce the actual design load supporting capacity and overall strength of the scaffold unit. In order to avoid metal corrosion and strength reduction, please store the scaffolding in a moisture-free and frost-free environment.
2. Frame scaffolding equipment needs to be repaired or refurbished, regardless of the contractor's degree of caution in time, general damage and accidental accidental damage will occur. Before and after each use of scaffolding, scaffolding ladder frame should be checked regularly, which is usually recommended. This will help the contractor to take quick action on damaged scaffolds, which may need to be repaired or refurbished to make them suitable for operation, properly support the load and restore the structure to good condition.
3. Any type of scaffolding or traditional pipe and fitting scaffolding are usually made of aluminum or steel. In essence, metal is not only prone to corrosion, but also prone to dent, damage and bending. Therefore, the correct handling and installation, transportation and storage of the scaffolding system and the repair or refurbishment of the scaffolding system are essential.
Frame scaffolding is considered the strongest product in any large or large construction project. No matter which type of scaffolding you are using, it should be stored, inspected and maintained regularly. If you are looking for high-quality scaffolding ladder frame equipment at a reasonable price, Nanjing Tuopeng Construction Technology Co. Ltd will provide you with the best products.
There is no denying that ring scaffold is highly recommended in the construction industry because it is more flexible and has higher carrying capacity. How high is the ring lock scaffold? How can we ensure safe construction on scaffolding?
What is ring lock scaffold?
What are the components of a ring lock scaffold?
How high is the ring lock scaffold?
How to use ring lock scaffolding safely?
Ringlock scaffolding system is one of the types of modular scaffolding. It allows workers to set up, use and dismantle temporary work structures quickly and efficiently, thereby saving time and labor costs. Ringlock is one of the most advanced and complete scaffolding systems on the market. It is designed to keep components to a minimum for easy setup and disassembly. A rose structure sits at the core of all the components. With its built-in safety mechanism and high load capacity, ring-locked scaffolding systems are a popular choice for many different types of applications.
The ringlock system is ideal for structures with complex heights and shapes. Annular scaffolding is always provided where angular flexibility is essential. It is designed to require minimal storage space. This multi-functional scaffold system is used for supporting and entering structures in construction, offshore construction, industrial maintenance and shipbuilding.
At the heart of the scaffold is a single rosette that can be connected to four supports and four horizontal lines simply by using a hammer. Ringlock can be used for circular, curved, or linear structures, as well as for mobile and stand-alone towers. The system lacks loose components that make it easy to use, maintain, and store.
The vertical column is designed to provide vertical support for scaffolding. It comes in many different sizes and can accommodate any structure. These can be bought with or without a tap. A vertical column is also called a standard.
The horizontal ledger is designed to provide horizontal support for platforms and loads. They can also be used as guardrails for safety reasons. They also come in various sizes to suit a variety of situations.
Diagonal bracing is used to provide lateral bracing for the support. They can also be used as stair systems or guardrails for tension and compression components.
The rotary fixture bracket is also used for lateral support of the bracket. In addition, it can be used as an obtuse guardrail in the stair system.
The truss ledger is designed to increase the strength of scaffolding and to withstand more weight.
The screw or base jack is the starting point of the annular scaffold. It is adjustable to allow variations in height when working on uneven surfaces.
Casters are used to make scaffolding towers that can roll and move from one point to another.
The step-down bracket is used to generate 250mm of step-down and can be attached to the baseboard or base lift.
When it is not possible to use the main bracket, the riser bracket is used to extend the platform to get closer to the structure.
The steel plate is responsible for creating the platform on which the workers actually stand. They are placed side by side, and the number of planks used determines the width of the platform.
The filler board is designed to create links between multiple workplatforms. They also prevent tools and other materials from falling off the platform.
Stair girders serve as diagonal sections of the circular stair system, and they also serve as connecting points for stair treads.
Storage racks and baskets. These components add flexibility and ease of use to work on annular brackets. As the name makes clear, these can be used to keep tools and other materials in one place to make the job easier.
A range of accessories can be added to ringlock scaffolding to make it easier to use or easier to use. Some of them include:
Rosette: used to add rosettes to any point on a vertical tube.
Davit Arm: this is a very useful component that can be used when lifting light loads with metal wheels.
Casing adapter clamp: allows connection of annular vertical parts at intermediate points such as truss ledger.
Rotary adapter clamp: this clamp can be used to connect the pipe to a single garland at various angles.
Switch pins: these pins lock the bottom and top vertical tubes together.
The height of ring lock scaffolding, according to national standards, there are no strict restrictions, but there is a set of specifications on the height of ring lock scaffolding. Regular scaffolding manufacturers in the setting of the factory scaffolding price, there will be factory inspection report, which is the use of more mobile scaffolding and overseas use of more export scaffolding have different inspection requirements.
Scaffold pole foundation shall meet the requirements of the scheme.
1.When the height is 25m or less, it can be rammed and leveled, and 5cm thick board is laid on it. When the length is 2m, it is placed perpendicular to the wall. When the length is greater than 3m, it shall be placed parallel to the wall.
2 when the construction height is 25-50m, the foundation method should be designed according to the field endurance or when backfill is adopted to meet the requirements, sleepers can be used to support the cushion, or 20cm thick ballast can be laid on the foundation, on which concrete slabs shall be laid, and channel 12-16 steel shall be laid.
3. When the erection height exceeds 50m, calculation should be made and the foundation design should be based on the endurance method, or a lime soil foundation should be adopted at a depth of 1m below the ground, or a concrete foundation 50m thick should be poured, and pillow cushion should be applied on the foundation.
When the vertical pole is not buried and 20cm above the ground, it is the same as the large horizontal pole to set the vertical and horizontal sweeping bar with no need to set the sweeping bar. Its function is to fix the bottom of the vertical pole and restrain the horizontal position and subsidence.
Wooden scaffold made 杄 buried, don't set 杄 sweeps the floor. Buried in a depth of 30-50cm. The bottom of the pit should be rammed with broken bricks, and backfill in the pit should be rammed in layers.
Scaffold based low-lying, consideration should be given no drainage measures, wooden scaffold made 杄 buried after backfill soil mass above the ground shall be maintained, to prevent the bottom water.
Scaffolds shall be assembled under the supervision and direction of qualified personnel.
Provide safe ladder access - workers should not climb on supports or structural components/frames.
Scaffold grade timber was used to create the platform.
Install sheeting and sheeting (whichever is smaller) on all scaffolds 10 feet from the ground or 2 frames.
Competent personnel train all personnel on safe scaffold use.
Ensure that the structure can support up to four times the maximum expected load, including its own weight.
Understanding the components of the ring lock scaffold and the rules for its use can help protect the safety of scaffolding workers, but it is also essential to choose a qualified ring lock scaffold that meets the standards. If you need a better, safer, and precision-tested ring lock scaffold, Nanjing Tuopeng Construction Technology can provide you with the perfect product.
Scaffolding is an integral part of almost any building project, and the most popular one is frame scaffolding. Sometimes scaffold is used to support workers and their tools, sometimes they need to support important loads of building materials such as bricks, blocks, plaster or cast-in-place concrete. Why is frame scaffolding the most widely used and what is its function?
Why are there so many different types of scaffolding?
The role and type of frame scaffold in construction
The principle of frame scaffolding
How to properly maintain the frame scaffolding?
Sometimes certain types of scaffolding are common because the equipment is easily accessible and many people know about this system. You may already be familiar with these regional differences, such as the Kwikstage in Australia and Scotland, and the tubes and clips in England and Wales. The complexity of each system has a lot of local expertise and native code written with these systems.
Different types of scaffolding systems will be more common depending on where you work in the world. Aluminum scaffolding is becoming more common in Scandinavia and Northern Europe, where labor is very expensive. Since aluminum is lighter than steel, most scaffolding must be manually lifted into place, and lighter scaffold means that scaffolding can be built faster, which reduces labor costs.
In some countries, aluminum is expensive and labor is cheaper, so wood and bamboo are quite common. As a designer, make sure you choose the scaffold system that best suits your project and follow local regulations.
First, the door type multi-functional scaffold: according to the specific construction requirements, the size and shape of different team frames, as well as the carrying capacity of single and double row scaffolding, frame, pole, material lifting frame, climbing scaffold, cantilever frame, etc. The function of the device. It can also be used to build barracks, tents, lighthouses, etc. It is especially suitable for the installation of scaffold surfaces and the refilling of supports.
Second, its high efficiency: common bars up to 3130mm, weighing 17.07 kg. The whole frame assembly and disassembly speed is 3 - 5 times faster than the conventional disassembly and assembly speed. The disassembly speed is quick and labor-saving. The workers use the hammer to complete all the operations, avoiding the inconvenience caused by the bolt operation.
There are several specifications, the height of the door scaffolding is 914, 1700 (1 meter 7), 1930 (933 meters), etc., generally 170 sets. As for the weight, it is best to use the standard of high-quality door scaffolding, about 80 kg. The key to concrete is to look at the specifications of the scaffolding of 80 inches. The gantry scaffolds of different specifications are about 2-6 pounds.
1. The door is the main component of the gantry scaffolding and can carry a greater load.
The support scaffold link arm lock is one of the basic components of the frame scaffold. The gantry is connected by a vertical link and a lock arm for longitudinal support of the scaffold. The scaffold plate can have the effect of a solid scaffold.
3. The adjustable base can be adjusted within a range of 200 watts and 550 mm high.
Mainly used for vertical height adjustment, each available
The top frame of supervision at the same level
Frame scaffolding is one of the most widely used scaffolding in building scaffold. Because the frame of the scaffold is a "frame word", it is called a frame or door scaffold, also called a frame scaffolding. The scaffold is mainly composed of a main frame, a horizontal box, a cross bracing, a scaffold, an adjustable base and the like. The frame scaffolding is the first in the United States. It has the characteristics of simple disassembly and assembly, good load bearing performance, safe and reliable use, etc.
Frame scaffold has been used for 5 to 8 years, but frame scaffolding has become an early s-type scaffold. Frame scaffolding is the most widely used type of scaffold.
The bracket was first developed in the United States. The frame bracket has the characteristics of simple disassembly and assembly, good carrying capacity, safe and reliable use, and the development is very rapid. The problem of the frame bracket has also been slowly changing.
The use of the frame bracket has a subsequent increase, so the frame bracket must do to increase the loss in peacetime.
Frame scaffold is usually an unavoidable hash during construction. Sometimes it is necessary to pay attention to prevent rust in rainy weather. Therefore, we usually do not use a layer of paint on the frame scaffolding to prevent frame scaffolding. This is a kind of frame scaffolding. The method of maintaining the scaffold of the frame, and the frame does not use scaffold. The normal time should be checked regularly and the parts can be found and replaced at any time.
Frame scaffolding plays an important role in the construction industry because of its convenience and safety, bringing convenience to people's lives. If you are looking for safe, durable, high quality and reasonably priced frame scaffolding, Nanjing Tuopeng Construction Technology can provide you with the perfect product.
Scaffolding is the main component used in almost all buildings around the world to support workers and provide the access needed for construction projects. Why is frame scaffolding so important and popular? How should we choose the right frame scaffolding?
What is the scaffolding for your project?
Why is high quality frame scaffolding important?
Errors to avoid when working on frame scaffolding
What is the scaffolding for your project?
Before renting a scaffold, consider which type is best for your project. Here are some of the types of scaffold you can use.
Support. Are you planning to expand or renovate your project? If so, this type of scaffolding is the best. As you work through the entire structure, it helps support the entire structure and also allows you to access the structure throughout the process. If there is a risk of structural overturning or collapse in the construction project, make sure to use the support.
Staircase tower. During the construction of the building, you and your staff will need to walk from one floor to another. The problem is that, in general, stairwells are not built to give you access to higher floors. Staircase tower scaffolding will allow you to move between floors without the use of stairs.
Dance floor. If you are working on a building that requires you to enter the ceiling, you will need to rent a scaffold to complete it. The dance floor scaffolding is designed to get you into the ceiling, including those that may seem too high to reach. With the right scaffolding, you can easily work on any ceiling.
Wall access. While the dance floor scaffolding allows you to easily access the ceiling, this type of scaffolding gives you direct access to the walls inside or outside the building.
Why is high quality frame scaffolding important?
One of the unique benefits is the positioning of scaffolding for the project. Mounting the scaffolding and its various scaffolding assemblies in an accurate position helps workers work efficiently. If this is a high-level problem, it can be achieved through ladders, but they often provide workers with an unstable platform because the ladder does not provide a stable platform for workers to maintain balance and work! However, scaffolding places workers directly where they need to work, ensuring that their safety is more broad and stronger. This type of security support and productivity is difficult to achieve by using other types of supportive build platforms.
The use of quality scaffolding at the construction site ensures great safety. Durable scaffold reduces the risk of workers and passers-by falling and getting injured. In fact, frame scaffolding provides workers with a smooth platform that allows them to move, stand and sit while at work.
In addition, frame scaffold safety should be a top priority for any construction site, as it allows workers working at heights to feel at ease. This is why high quality frame scaffold is an unparalleled part of the construction process.
Another major advantage of using reliable frame scaffold is the difficulty of reaching the area. It provides workers with the necessary heights, including a small platform of fibers, wood or lightweight metal at the top of the network, creating a solid foundation for workers. In fact, high quality scaffold provides better durability and long-term load carrying capacity.
Before you buy a durable frame scaffold for your project, keep in mind some important factors, such as the flexibility, safety and unparalleled quality of the construction site workers.
Errors to avoid when working on frame scaffolding
When you plan to frame scaffold for an upcoming building project, you need to ensure that your workers are properly trained and trained in the basics of scaffold safety. Without proper safety measures, scaffold can be a very dangerous part of the construction site. Fortunately, your frame scaffolding resources will be able to provide you with the tools and training to teach your workers about the safety of scaffold. Here are some of the mistakes you should avoid when using scaffolding.
Lack of fall protection. To protect workers who use scaffold systems, you need to make sure your scaffold is equipped with appropriate fall protection. Falling down the scaffold can cause very serious injuries. Your frame scaffold resources can provide you with guardrails, ladders and other forms of protective equipment to help prevent falls.
Unable to protect the object. As it falls off the scaffold, it is dangerous to hit debris or other objects on the scaffold. When you work on scaffold, you need to make sure that any tools and materials you use are properly seated. It is also a good idea to place the safety net under the scaffolding.
Incorrect scaffolding building specifications. OSHA requires that all scaffold systems take into account a specific set of safety requirements. When you build scaffold, you need to make sure your scaffolding meets building and safety regulations. Scaffold that meets specifications will support the weight of workers and building materials.
If you want to save money by using cheap frame scaffold, you may create a dangerous environment for your workers. However, if you are looking for high durability, unbeatable quality, and most importantly, secure frame scaffolding, Nanjing Tuopeng Construction Technology can provide you with the perfect product.
The layher scaffolding ensures the smooth progress of the construction process. This article will introduce the relevant knowledge of the layher scaffolding framework, I hope it will be helpful to everyone.
Safety requirements for layher scaffolding.
layher scaffolding products owned by the company.
(1) When erecting high-rise layher scaffolding, all materials used must meet the quality requirements.
(2) The foundation of high-rise layher scaffolding must be firm, calculated before erection, meet the load requirements, and erect according to construction specifications, and take good drainage measures.
(3) Technical requirements and specifications for layher scaffolding erection.
(4) Various structural measures must be attached great importance to: Scissors, tie points, etc. should be set up as required.
(5) Horizontal sealing: starting from the first step, every step or two steps should be covered with scaffold boards or scaffold fences. The scaffold boards should be laid in the long direction. The joints should be overlapped on the small crossbars. Empty boards are strictly forbidden. And pave a long safety fence every four steps between the inner pole and the wall.
(6) Vertical closure: From the second to the fifth step, a 1.00m high protective railing and foot guard or a net must be set on the inner side of the outer row of vertical poles for each step, and the protective pole (net) must be fastened to the vertical pole. ; In addition to protective barriers above the fifth step, all safety fences or safety nets should be set up; in the streets or densely populated areas, you should start from the second step, and all the outer sides should be set up with safety fences or safety nets.
(7) The layher scaffolding should be 1.5m higher than the top of the building or the operating surface, and enclosures should be added.
(8) Before the layher scaffolding is used, the person in charge of the site should organize the inspection and acceptance, and the scaffold can be used after passing the acceptance and filling in the inspection form. During the construction process, there should be professional management, inspection and maintenance, and regular settlement observation should be carried out. Reinforcement measures should be taken in time if abnormalities are found.
Nanjing Tuopeng Construction Technology Co., Ltd. is a professional layher scaffolding manufacturer and exporter of China's safest layher scaffolding materials with competitive prices. Customization requirements can be met here. Our products are exported to Canada, the United States, Trinidad and Tobago, New Zealand, Thailand, Malaysia, Colombia, the Middle East, Poland and other European countries. Whether you are a distributor, contractor or factory, you can always find what you need from us.
We can provide layher scaffoldings, scaffold Frames ring lock scaffolds, scaffold tubes, cup lock scaffolds, scaffold clips, Scaffold props, and other products
If you are satisfied with our company's layher scaffolding, you can directly order or consult the layher scaffolding related issues. We will provide you with the best layher scaffolding products and services. Looking forward to your visit, I wish you success in your work.