The mason frame scaffolding is recognized by its sturdy, easy to install and disassemble, but if the construction requirements are not clear, there is still a certain risk in the construction of the scaffold. For example, do you know the maximum load capacity of the mason frame scaffolding?
What is the stonemason frame scaffolding?
Maximum expected load of mason frame scaffolding
Rug load capacity of mason frame scaffolding
What are the general requirements for scaffolding?
Mason frame scaffolding is a common industry term referring to our popular frame and support scaffolding. All types of contractors, from carpenters and mason to weekend project owners, use the most common scaffolding to make bricks or bricks safer and more efficient. It is easy to install and remove, allowing you to reach the required height quickly.
Masonry frame scaffolding is generally used for masonry. They are usually used by one or two-story residential contractors, painters, etc., but their modular framework can also be stacked multiple times in large construction projects. In the masonry frame scaffolding, there are two standard frames, 1.5 m from the first standard. The masonry frame scaffolding is completely independent of the stone wall.
The mason frame scaffold consists of two ladders, two pairs of crossbars and four connecting pins.
Frame scaffolding is easy to install and remove, saving time and energy.
Workers can climb the ladder smoothly and safely without the need for additional ladders.
The trapezoidal mason frame scaffolding is especially suitable for brick structures, exterior wall paints or plastering works. Easy to operate, the masonry frame scaffolding can be moved with the casters to carry heavy objects because the weight on the stones is heavy. Therefore, by placing the standard at a fairly close distance, the mason frame scaffolding becomes stronger.
Each scaffolding and scaffold assembly should be capable of supporting its own weight without damage and at least four times the maximum expected load applied or transmitted to the scaffold. In order to calculate the maximum expected load, the total weight of all personnel, equipment, tools, materials, transfer loads and other loads applied to the scaffold (or scaffold components) is reasonably expected at all times. (estimated 250 pounds per person.)
The loading of scaffold and scaffolding components must not exceed their maximum expected load or rated capacity, whichever is less. The rated load capacity of the bracket is defined as follows.
Rated load capacity
Scaffolding rated load capacity
Should be the expected load
The maximum weight that can be applied to the bracket is determined by the data provided by the manufacturer and is expressed as an allowable load per square foot (eg, 25 psf, 50 psf or 75 psf, multiplied by the square feet of the working surface of the bracket).
A simple method of overloading to determine if the stent is overloaded is the deflection method. When loading, the deviation of the platform, wood or trim panel shall not exceed 1/60 of the span. The deflection is measured with a tape measure and a straight edge.
Scaffolding above 125 feet above the floor must be designed by a registered professional engineer (ie qualified person).
Prohibition of scaffold lean brackets is prohibited. Tilting brackets are supported by leaning against a building or structure and resting against a building or structure.
Shore scaffolding is prohibited. The scaffold on the shore is placed against a building or structure and secured with props.
If you understand the maximum expected fit of the mason frame scaffolding, then you will be able to ensure the safety of the construction workers on the scaffold and the safety of your property, which is why it is important to choose a qualified scaffold for precision testing. If you want to buy a safe, durable, reasonably priced, high quality mascot frame scaffolding, Nanjing Tuopeng Construction Technology can provide you with the perfect product.
Frame scaffolding plays an important role in the construction industry, but it is a broad concept, and there are many small classifications in the frame scaffolding, such as mason frame scaffolding. It is good to know some knowledge about it, such as why is the mason frame scaffolding so important?
What is the mason frame scaffolding?
What are the characteristics of the masonry scaffolding?
What are the advantages of the frame scaffolding system?
Usually, mason frame scaffolding is used for stone work. In the mason frame scaffolding, there are two standard frames with a distance of 1.5 meters from the first standard. The mason frame is completely independent of the stone wall.
The mason scaffolding is used to carry heavy loads because the load on the stones is very heavy. Therefore, the mason frame scaffolding is made stronger by placing the standards at fairly close distances.
Masonry scaffolding or masonry frame scaffolding is a common industry term referring to our popular frame and supporting scaffolding. This is the most common type of scaffolding used by all contractors, from carpenters and mason to owners of weekend projects, who use this scaffolding to make bricks or bricks safer and more efficient. It is easy to install and remove, allowing you to reach the required height quickly.
They are often used by one or two-story residential contractors, painters, etc., but their modular framework can also be stacked several times in large construction projects.
1. The mason frame scaffolding consists of two ladder frames, two pairs of beams and four connecting pins.
2. Frame scaffolding is easy to disassemble and install, saving time and effort.
3. Workers can climb the ladder smoothly and safely without the need for additional ladders.
4. Trapezoidal quartz frame scaffolding is especially suitable for masonry wall construction, exterior wall painting or plaster construction. It is easy to operate and easy to move with casters.
The scaffolding system is the most used scaffolding system in the construction industry and is the main raw material for all scaffolding system suppliers. It has been used for decades, but it is still used in large or small construction projects. The popularity of suspension systems in Malaysia and around the world depends on many advantages.
In construction, time is money. The frame scaffolding system is simple in structure, easy to install and disassemble, and saves a lot of installation and disassembly time. This further saves costs because the stent system typically comes from the stent supplier.
Safety. The frame scaffolding system uses high-strength steel pipes and heavy-duty grade structures for good safety. The simplicity of the frame scaffolding further enhances its safety and robustness, allowing workers to worry about their safety with less work.
Versatility. The frame scaffolding system can be used for the repair and support of various masonry structures of various locking types and pipe diameters. The availability of stonemason scaffold, ladders, drills and pedestrian canopy frames allows for more scaffolding rental options, allowing the scaffolding system to be used in almost any area and corner.
Each scaffold and scaffolding component must support its own weight without failure and is at least four times the maximum expected load applied or delivered to it.
Qualified personnel must design a bracket to load the bracket according to this design.
The loading of scaffold and scaffolding components must not exceed their maximum expected load or rated capacity, whichever is less.
Wood-bearing components should be at least 1,500 lb-f / in2 of building grade wood.
Knowing the characteristics and use requirements of the mason frame scaffolding, you can better ensure the safety of the construction personnel, but more importantly, choose the standard scaffold. If you are looking for durable, sturdy, reasonably priced high quality mason frame scaffolding, Nanjing Tuopeng Construction Technology can provide you with the perfect product.
Scaffolding couplers, including connecting steel pipes, flat steels, hardwood wedges and cross buckles, etc. This article will introduce the relevant knowledge of the scaffolding coupler, I hope it will be helpful to everyone.
Features of the scaffolding coupler.
The scaffolding coupler products owned by the company.
The scaffolding coupler is characterized in that it includes connecting steel pipe (1), flat steel (2), hardwood wedge (3) and cross buckle (4), and uses the reinforced concrete structure (5) of the building floor as the front and exterior The scaffold is used as the rear, the outer scaffold is made of steel pipe, the rear end of the flat steel is fixed on the front end of the connecting steel pipe, and the front end of the flat steel is provided with a first bolt hole. A longitudinal reinforcement column head (6) is embedded, and the reinforcement column head passes through the first bolt hole at the front end of the flat steel. The front end of the connecting steel pipe is in the shape of a two-way slope CJ (10). The two-way bevel means that the lower side of the slope is closer to the building floor reinforced concrete structure than the upper side of the slope, and the left and right sides of the slope are more than The other side is closer to the reinforced concrete structure facade of the building floor. A gap is formed between the two-way groove, the reinforced concrete structure facade of the building floor and the flat steel. The hardwood wedge in the scaffolding coupler is nailed to the gap. The middle and hardwood wedges press against the external facade of the reinforced concrete structure of the building floor, and the cross buckle in the scaffolding coupler connects the rear end of the connecting steel pipe with the riser (7) of the external scaffold.
The scaffolding coupler is characterized in that when the reinforced column head is to be poured and the concrete (9) is to be poured, a plastic protective cover (8) is provided. The front and outer scaffolds serve as the rear, the rear end of the protective cover is provided with an opening for passing through the flat steel, and the front end of the flat steel passes through the opening.
The products provided by Nanjing Tuopeng are high-quality and affordable scaffolding materials. Customization requirements can be met here. Our products are exported to Canada, the United States, Trinidad and Tobago, New Zealand, Thailand, Malaysia, Colombia, the Middle East, Poland and other European countries. We can provide scaffolding couplers, ring lock scaffolds, cup lock scaffolds and other products. Among them, the scaffolding coupler includes: scaffold drop forged joints and scaffold press joints.
If you are satisfied with our company's scaffolding coupler, you can directly order or consult the scaffolding coupler related issues. We will provide you with the best scaffolding coupler products and services.
The scaffolding frame ensures a smooth construction process. This article provides relevant scaffolding insights that will hopefully be useful to all.
Types of scaffolding frame.
Scaffolding frame products owned by the company.
Scaffolding frame mainly includes portal frame (Walkthrough Frame or Open Frame) and ladder frame (Step Frame or Ladder Frame) due to different application methods and designs. There are also companies that make the columns of the portal frame into double tubes to increase the bearing capacity. Or change the portal frame into an arched structure, and its mechanical principles are basically the same. Its nodes are characterized by rigid knots.
Portal scaffolding is a kind of mobile scaffolding produced in factories and erected on site. It is one of the most commonly used scaffolding frames in the world today. It can be used not only as external scaffolding, but also as internal scaffolding or full-room mobile scaffolding. Portal steel scaffolding is widely used in the construction of buildings, bridges, tunnels, subways and other projects due to its standardized geometric dimensions, reasonable design, good mechanical properties, easy erection and dismantling during construction, safety and reliability, cost-effectiveness and practicality. The lower part is equipped with wheels, which can also be used as a working platform for electromechanical installation, paint painting, equipment maintenance, and advertising production. When erecting scaffolding for steel portal tubes, the scaffolding should normally only be erected in accordance with the service loads and erection standards specified in the product catalogue, and does not need to be subjected to additional testing.
The portal frame, which has been introduced and widely used in our country, is one of the foreign frame-type scaffolds. It is mainly used in places where personnel and materials need to be passed in the middle of the frame. Another variety of scaffolding frame, the ladder frame, is more widely used in foreign countries, because many applications do not require the passage of personnel and materials in the middle of the frame, and the safety and economic performance ratio of the ladder frame will be relatively higher, but they have not been introduced and widely used to our country yet. Therefore, there is a misunderstanding that the portal frame has replaced the common type scaffolding
Nanjing Tuopeng Construction Technology Co., Ltd. is a professional scaffolding frame manufacturer, with competitive prices. Customization requirements can be met here. We export to Canada, USA, Trinidad and Tobago, New Zealand, Thailand, Malaysia, Colombia, the Middle East, Poland and other European countries. Whether you are a distributor, contractor or factory, you will always find what you need.
We offer scaffolding fram, scaffolding clamps, System scaffolding, formwork props and other products.
If you are satisfied with our scaffolding frame, you can order directly or consult us on scaffolding-related issues. We offer you the best scaffolding frame products and services. We look forward to your visit and wish you every success in your endeavors.
Layher scaffolding is a new type of in-line steel scaffolding with self-locking function. This article will introduce the relevant knowledge of layher scaffolding, I hope it will be helpful to everyone.
Introduction of layher scaffolding.
The company has layher scaffolding products.
Layher scaffolding is a new type of in-line steel scaffolding with self-locking function. layher scaffolding has large bearing capacity, fast construction speed, strong stability and convenient on-site management.The main components are columns and cross bars. The structure of the disc buckle nodes is reasonable. The axial force transmission of the poles makes the three-dimensional structure of the ring-layer scaffold high in strength, good overall stability, and reliable self-locking function, which can effectively improve the overall stability and strength of the scaffold. Safety can better meet the needs of construction safety. layher scaffolding is quick to disassemble and assemble, labor-saving, simple structure, stable and reliable, strong versatility, large carrying capacity, safe and efficient, not easy to lose, easy to manage, and easy to transport.
Layher scaffolding is universal: layher scaffolding can be constructed according to specific construction requirements to form single-row, double-row scaffolding, support frames, support columns and other multi-functional construction equipment with different frame sizes, shapes and load-bearing capacities.
Layher scaffolding has high efficiency: simple structure, convenient and quick disassembly and assembly, completely avoiding the loss of bolt operation and the dispersion of fasteners, and the assembly and disassembly speed of joints is more than 5 times that of conventional blocks. Fast and labor-saving installation and disassembly. The worker uses a handful of iron. The hammer can complete all operations.
The layher scaffolding has a large bearing capacity: the rods are connected to the same bearing socket, the nodes are in the frame plane, and the joints have mechanical properties such as bending, shearing and torsion. The structure is stable and the bearing capacity is large.
Nanjing Tuopeng Construction Technology Co., Ltd. is a professional system scaffolding manufacturer and the safest system scaffolding material exporter in China, with competitive prices. Customization requirements can be met here. Our products are exported to Canada, the United States, Trinidad and Tobago, New Zealand, Thailand, Malaysia, Colombia, the Middle East, Poland and other European countries. Whether you are a distributor, contractor or factory, you can always find what you need from us.
We can provide frame scaffolds, scaffold connectors, layher scaffoldings, scaffold tubes, cup lock scaffolds, scaffold clips and other products.
If you are satisfied with our company's layher scaffolding, you can directly order or consult related questions about layher scaffolding. We will provide you with the best layher scaffolding products and services. Looking forward to your visit, I wish you success in your work.
We all know that scaffolding can assist building construction, repair and maintenance, but many people do not understand that scaffold coupler is an important part of it. What function does scaffold coupler have after all? How many types of coupler?
What is scaffold coupler?
What are the types of scaffold couplers?
Scaffold coupler function
Scaffold coupler is basically used to assemble tube and coupler scaffold basic components. Scaffold connectors are installed on scaffold pipes to hold struts in place. They support internal-to-internal-strut or internal-to-exterior strut with fixed or rotating fittings, depending on the structural application of support pipes and fittings required. The coupler works by creating a straight line or an Angle to ensure that the rest of the scaffold is securely fixed in a structurally stable position. In general, these products rotate at standard 90 degree angles with central positioning to give additional support to scaffolding.
Scaffold coupler is suitable for various situations. Whenever you connect the two scaffold tubes together, you will need the right coupler to do the job.
Customers can easily get couplers and accessories of different sizes and sizes, and choose according to their own needs.
Rectangular coupler. In architecture, rectangular couplers are standard for adding transformers. These types of couplers can be in various sizes, including,48X48,43×43 × 48,48×60, etc., depending on your specifications.
Rotating coupler. They are handy when creating custom angles, which means they can connect the two pipes at any Angle you want. The scaffold tube rotary coupler can be used to tighten the connection between two pipes in the correct way. However, their main application is diagonal bracing, or cross bracing, placed between vertically aligned pipes.
Platt's coupler. Some people call it single coupler, mainly for the transverse connection 杄 and ledger, to strengthen the scaffolding plank. These types of couplers are generally considered to be suitable for light activity of scaffolding, because they can't bear the weight of so many.
Of the three main types of couplers mentioned above, it should be noted that only double couplers and rotary couplers are ideal for "load-bearing connections". The sleeve
Coupler or connector pins are used to develop end - to - end connections connecting two scaffold tubes.
Sleeve coupler. These are primarily designed to externally connect two scaffolding pipes at both ends. However, there is a central position of the steel separator to ensure that each tube is inserted equally into the other. They are important where tensioning joints are needed, so they can be used effectively for long bracing and sorting pipes
Scaffold pressure steel sleeve joint design is accurate, because its durability, reliability and best results are highly recommended. Couplers have different specifications that can be customized. Easy to maintain, very durable and reasonably priced.
Toe plate coupler. Couplers are used to hold circuit boards in place and are highly appreciated for their fine surfaces, durability, optimum performance and high quality. These features are durable, cost effective and in perfect shape.
Double coupler. Couplings are praised for their better grip, durability, reliability and long service life. When connected to pipes with rectangular joints, it is easy to operate and supplied at the best rate in the industry. Features: Oriental maintenance, wear - resistant, fine surface.
According to the steel clamp. It is known for its wear resistance, corrosion resistance and longer running time. These clips are available in different specifications to meet customer requirements. Features: wear-resistant, very durable, affordable price.
Given the important role couplers play in falsework construction, it is always wise to know how to get the best support. Knowing the main characteristics of a coupler or clamp will enable you to determine whether the coupler you have chosen is adequate for your needs. Below are some of the main features of the falsework fixture/coupler we provide.
Sturdy and durable. Couplers are designed from hard materials for better support and longer life. Most couplers are made of steel.
Steel is one of the hardest metals in the world. In addition, they can be galvanized to prevent corrosion and corrosion even in harsh atmospheric conditions.
Quality mark. With the diversity of falsework products on the market today, determining the best quality can sometimes be challenging. Supplier's certification is basically a document that displays the specifications of each scaffold coupler, including tags, production dates and user manuals.
Low cost coupler. Cost is another important factor to consider when choosing a scaffold coupler. We understand that budgets often vary from project to project, which means you need a price that matches your funding constraints.
Scaffold coupler needs less maintenance, has perfect machinability, durability and long service life and is welcomed by people. If you need durable, well-tested and reasonably priced scaffold couplers, Nanjing Tuopeng Construction Technology can provide you with the perfect product.