Views:0 Author:Site Editor Publish Time: 2021-11-02 Origin:Site
Scaffolding clamps are a kind of mechanical parts that are used for fastening connections and are extremely widely used. This article will introduce the relevant knowledge of scaffolding clamps, hope it will be helpful to everyone.
Correct use of scaffolding clamps.
scaffolding clamp products owned by the company.
The accumulated sand sticking area of the scaffolding clamps shall not be greater than 100 square millimeters. The surface of the scaffolding clamp is not allowed to have oxide scale. The remaining technical requirements are in line with the provisions of GB15831-2006.
The correct use of scaffolding clamps is beneficial to prolong the life of the scaffolding clamps. The correct use methods are as follows:
1. The construction plan must be prepared before the construction of the scaffolding clamp-type steel pipe formwork bracket, and a relatively strict and thorough construction plan must be formulated. If the plan is not well formulated, some unforeseen events may occur during construction.
2. Appearance quality requirements of scaffolding clamps. The appearance quality of scaffolding clamps is often inspected. Scaffolding clamps with cracks, deformation or slippage of bolts are strictly prohibited to use; to prevent construction failures and accidents caused by the use of these unqualified scaffolding clamps.
3. The steel pipes and scaffolding clamps used for erecting scaffolding clamp-type formwork brackets must be sampled and tested before use. The quality and appearance of the steel pipes and scaffolding clamps must be sampled to check whether the quality and appearance of the steel pipes and scaffolding clamps meet the standards. Sampling test, untested or unqualified shall not be used.
4. Regarding the carrying capacity of the scaffolding clamp, the construction load on the working layer should meet the design requirements, and must not be overloaded, and must carry a certain weight. The scaffold must not be connected to the formwork bracket, and certain treatment must be carried out when connected to ensure the reasonable carrying capacity of the scaffolding clamp. weight.
Nanjing Tuopeng Construction Technology Co., Ltd. is a professional scaffolding manufacturer and exporter of all kinds of safest scaffolding materials in China, with fast delivery time and competitive prices. Customization requirements can be met here. Our products are exported to Canada, the United States, Trinidad and Tobago, New Zealand, Thailand, Malaysia, Colombia, the Middle East, Poland and other European countries. Whether you are a distributor, contractor or factory, you can always find what you need from us.
We can provide frame scaffolds, scaffold connectors, ring lock scaffolds, scaffold tubes, cup lock scaffolds, scaffolding clamps and other products. Among them, the scaffolding clamp includes: Right angle clamp, swivel clamp, putlog clamp, beam clamp, BRC clamp, ladder clamp, sleeve clamp, etc.
If you are satisfied with our company's scaffolding clamps, you can directly order or consult related questions about the scaffolding clamps. We will provide you with the best scaffolding clamp products and services. Looking forward to your visit, I wish you success in your work.